You may also want to try using the reverse button, but many times the pouches will get stuck between several rollers, and you risk destruction of the entire machine by attempting to take them out manually. If you have had the laminator under a year, it should be under warranty, and you can call the company, and they will send a replacement, and they will probably then inform you of the above listed laminating pouch issue. If you were using GBC brand laminating pouches they don't need a carrier, if you were using another brand of laminating pouches, then a carrier is needed (something they don't clearly specify) and that's why the laminating pouch got stuck. Remove the offending material and then put everything back together. Careful as these are made of plastic and break easy.

Using the size 3 hex bit undo the 4 hex screws at the exposed end and lift up and out the 2 housing bits. Intel(r) pro/wireless 2200bg network connection. You will see four rollers two on each side of the heater element. Hold the non power end and it should slide off. Lamination helps to preserve and protect your documents and important papers from everyday wear and tear. Next you will need size 3 and 4 hex bits. If you decide to do it yourself here is how: turn the unit over and on the end with only one screw (not the power setting side) take it out using a Philips screwdriver. 17 Answers SOURCE: You can open this yourself but i recommend sending it for repair.Design Concepts Laminator Yj-3071 Manual.

Design concepts laminator manual